Î{ÊUÊ" E , 9
ratio of 1:2,000 will keep fuel flowing by preventing the formation
of gelled fuel and ice blockages. If you are presently experiencing
these blockages, apply Technol 050 at the ratio of 1:200 to melt
gelled fuel and ice. Once they are melted, Technol 050 will act as
an “anti-freeze,” preventing both the fuel and water from re-gelling
and re-freezing. Be sure to protect your fuel and fuel system every
time it is refueled by applying Technol 050 until warm tempera-
tures arrive. Anti-gel agents permit fuel to flow smoothly even
under the most extreme cold climate conditions. Anti-gel agents
(cold flow improvers) are wax crystal modifiers that limit the size
and modify the shape of wax crystals formed at temperatures far
below the cloud point. These wax crystals are both smaller and less
cohesive than the larger crystals that form an impervious mass that
cause fuel blockages in unconditioned fuel.
Technol
®
C-10 Corrosion Inhibitor:
Technol C-10 is the
water control specialist! With continued use it will effectively pre-
vent further fuel tank/system rust and corrosion from occurring.
Technol C-10 emulsifies larger amounts of water that common
fuel additives aren’t able to handle themselves, and also melts
ice. The presence of a free water layer on the tank bottom will in
time rust out the tank, causing downtime, expensive equipment
replacement, leak/spill hazards to the environment and possible
EPA visits and fines.
Technol
®
D-Ice:
Technol D-Ice is formulated to melt and pre-
vent ice – period! If your fuel system is contaminated with water
during cold climates, applying D-Ice will prevent ice from forming.
If your tank is already iced up, Technol D-Ice will melt existing ice
and then keep working to prevent this free water from re-freezing.
Biobor
®
JF Microbicide:
Biobor JF eliminates growth of
harmful slime-producing fungi and algae that clog filters and fuel
lines, that attack rubber fuel system components, and whose waste
products aid in the corrosion of metal surfaces.
Technol
®
453 Diesel Fuel Conditioner:
EPA-registered for on
and off road applications, Technol 453 is a premium, year-round
conditioner designed to improve diesel fuel to reduce fuel-related
downtime and maintenance costs. Technol 453 prevents gelled
fuel and ice, increases fuel lubricity 12%, and inhibits corrosion. It
increases Cetane up to 5 numbers for faster starts, disperses sludge,
and cleans the entire system. It will stabilize fuel and keep it “fresh.”
=l\c 9c\e[`e^ 8[m`Z\
We recommend that dealers use STR-2+ in Bioblends up to 20%
for better performance and reduced handling and storing issues.
When applied to the holding tank, the benefits of STR-2+are real-
ized in that tank, and then, subsequent tanks on the trucks, and
finally the end user’s tank. All with one application. Please refer to
Technol STR-2+ description for all that our STR-2+ has to offer.
Gi\m\ek`e^ :fiifj`fe
Our Technol C-10 Corrosion Inhibitor is designed to prevent
water damage. We also recommend the use of STR-2+ to prevent
corrosion. STR-2+ contains C-10, along with other components
that provide all the benefits of a year-round fuel conditioner for the
entire fuel system.
you have a sludge problem until your filters clog. Keeping your
fuel stabilized throughout the year will inhibit sludge buildup
from forming. Sludge dispersants break up and dissolve fuel
sediment sludge small enough that most pass harmlessly though
filters and injectors. This enables your fuel system to operate at
its peak efficiency with an optimally atomized fuel spray, leading
to an increase in fuel economy. Prevents gelled fuel – The pour
point of your fuel is lowered by up to 25°F. Cold flow improvers
modify the wax crystals that form at temperatures below the cloud
point by keeping them from forming an impervious mass of gelled
fuel that blocks fuel flow. This keeps your fuel free flowing during
cold climate conditions. Prevents ice – Any free water within the
tank, and water that the fuel has absorbed, is kept from freezing.
All ice and ice crystals are melted and prevented from refreezing.
Emulsifies water – Water is not only inherent in fuel oil, but
can be introduced at any point between the refinery to delivery.
Technol STR-2+ enables water and fuel oil to mix, and this “emul-
sion” is removed from the tank as the fuel is called upon to heat
your home. This keeps water contamination from building up,
controlling algae and corrosion. Controls algae – When water is
removed, the environment that algae and bacteria need for life
and growth is also removed, keeping tanks clean and filters and
lines from clogging. This keeps downtime and maintenance costs
to a minimum. Corrosion inhibitors – Continued use of Technol
STR-2+ will protect your fuel system from further rust and cor-
rosion. Corrosion occurs unseen from the inside until your tank
springs a costly leak. Improves fuel combustion and efficiency –
Combustion Improvers enable your fuel to ignite faster for a more
complete fuel burn. Results are increased BTU output while using
the same amount of fuel. Carbon, soot buildup, and emissions are
reduced when compared to using unconditioned fuel. With a clean
fuel system operating at peak efficiency and your fuel providing
more BTU output, fuel economy savings may increase up to 5%.
Greater benefits are possible depending upon fuel quality. Works
in Blended Biofuel – The same benefits are achieved in blended
Biofuel up to B20 blends Technol STR-2+ is the most cost effective
maintenance conditioner that will keep your fuel and fuel system
at their peak efficiency.
Technol
®
246 Super Sludge Dispersant:
Technol
®
246 has
been specifically formulated for sludge-contaminated fuel tanks.
The entire fuel system, from tank to injectors along with the heat
transfer tubes, is cleaned. This allows the fuel system to operate at
its optimum designed efficiency with the maximized BTU output
and heat transfer possible. Beyond cleaning the entire fuel system,
Technol 246 emulsifies and removes water, inhibits fuel system cor-
rosion, and further improves #2, #4, and #6 Fuel Oil and Kerosene
combustibility for a more complete fuel burn. BTU output is
increased, you get more heat/power from the same amount of fuel
resulting in improved overall fuel quality and economy.
Technol
®
050 Cold Flow Improver (EPA Registered):
Technol
®
050 is a highly concentrated, unique severe cold climate
distillate cold flow Improver. Cold Filter Plug Point (CFPP) is
lowered by up to 30°F, and the Pour Point by up to 50°F. Technol
050 when used proactively, before the onset of cold weather at the
Fuel Quality
